威尔国际赣东矿山机械是一家专业矿山选矿设备机械制造、矿物分析、选矿流程设计、洗砂机设备选型、设备安装调试于一体的大型矿业公司


江西威尔国际矿业装备公司
首页 > 产品中心  > 洗砂设备

细沙回收机

细沙回收机功能介绍:江西省威尔国际矿业装备有限公司是一家专业的细沙回收机厂家,为你提供细砂回收机价格,欢迎你来电咨询!

产品详情


细沙回收机功能介绍:江西省威尔国际矿业装备有限公司是一家专业的细沙回收机厂家,为你提供细砂回收机价格,欢迎你来电咨询!

细沙回收机又名细砂回收机、细砂收集机、细砂提取机、细砂回收装置、细砂回收设备。

目前现有的人工机制沙生产线,绝大部分采用湿法生产工艺,不论采用哪种形式的洗砂机,其最大的缺点是细砂(0.2mm以下颗粒)流失问题严重,有的甚至流失20%以上。这不但损失产量,而且还严重影响砂子的级配,造成级配不合理,细度模数增大,大大降低了机制砂的产品质量。在混凝土搅拌中不仅增加了水泥的用量,提高商硂的成本,而且过多的细砂排放,还会造成土地资源的浪费和环境的污染。针对以上问题,我公司成功研制了YC系列细砂回收设备,该设备是我公司吸收国外的先进技术,结合客户实际生产中细沙流失严重的情况而专门设计的高科技环保设备。

细沙回收机在实际运用当中,不需要额外增加用水量,能够在原来排放的废水当中提取回收85%以上被冲走的细沙或矿石,直接掺入成品堆或单独存放作为高级别用材使用,直接替客户挽回综合经济效益15%以上。

本设备广泛应用于水电站砂石骨料加工系统、玻璃原料加工系统,人工制砂生产线、选煤厂粗煤泥的回收及环保工程(泥浆净化等)等,可有效解决生产线细沙回收问题。

细沙(砂)回收机工作原理:专用离心渣泵将清洗槽内的砂水混合物输送至旋流器,离心分级浓缩的细砂经沉砂嘴提供给振动脱水筛,经振动筛脱水后,细砂与水有效分离,少量细砂,泥等经返料箱再回到清洗槽,于旋流器回流的混合液产生混合,再次被送至旋流器分离。当清洗槽液面过高时,经出水口排出。可通过改变离心泵转速、改变砂浆浓度,调节溢流水量,更换出砂嘴来实现细度模数调整,从而完成清洗、脱水和分级三种功能。

细砂回收机

细砂回收机特点

1、降低细沙流失量,提高经济效益的同时降低了对环境的污染。

2、振动筛采用聚氨酯筛网,聚氨酯筛网较其它类型筛网寿命更长,且不易堵孔。

3、旋流器内衬聚氨酯,提高了整个装置的使用寿命,可顺利完成料浆浓缩,液体澄清等工作。 

4、细砂得到充分回收,减少沉淀池的工作量,降低了沉淀池的清理成本。 

5、减少了细料堆放时间,可直接转运,供应市场。 

6、经过多次现场试验和改进,精简多余部件,设备整体结构简洁高效,回收能力强,操作和维护方便,运营费用低。 

7、专业工程师可根据用户的不同要求,设计合理的解决方案。 

8、设备参照国家环保标准,噪音低,可配套设备除尘,施工环境完全符合环保要求。

 

Sand recycling machine which is also called fine sand recycling machine, fine sand recycling system, fine sand collecting machine, sand recovery machine, fine sand recycling equipment.


Existing artificial mechanism of sand production line, the vast majority of the wet process, irrespective of the form of sand washer, the biggest drawback is fine (below 0.2 mm particles) erosion is serious, some even lost more than 20%.Not only the loss of production, but also seriously affect the distribution of the sand, the grading is not reasonable, fineness modulus increase, greatly reduces the mechanism of sand quality of the product.Not only increased the dosage of the cement in concrete mixing, raise the cost of business propose, and too much fine sand discharge, also can cause the waste of land resources and the environment pollution.To solve above problems, our company successfully developed a series of YC fine sand recycling equipment, this equipment is our company absorbing foreign advanced technology, combined with the customer in the actual production of sand erosion is specially designed for high-tech environmental protection equipment.

 

Fine sand recycling machine in practical application, don't need an additional water, extraction of discharge of waste water in the original recovery more than 85% were washed away in the sand or ore, directly adding finished pile or separate storage used as high grade material, directly for clients save comprehensive economic benefit is more than 15%.

 

This equipment is widely used in hydroelectric power station sand aggregate processing system, glass raw material processing system, the artificial sand production line, coarse coal slime recovery of coal preparation plant, and environmental protection engineering (mud purification, etc.) and so on, which can effectively solve the problem of sand production line recovery. 

 

Fine sand recycling machine working principle: special pump centrifugal slag cleaning of the tank in the sand and water mixture to hydrocyclone centrifugal grading enrichment of fine sand by grit mouth for the vibration sieve dehydration, after sieve dehydration, effective separation of fine sand and water, a small amount of fine sand, clay and so on will be returned to the box back to cleaning tank, mixed reflux of mixture in hydrocyclone, to be sent to the cyclone separation again.When cleaning tank level is too high, the discharge outlet.May be changed by changing the centrifugal pump speed, slurry concentration, regulating the overflow of water, replacement of sand mouth to achieve fineness modulus adjustment, so as to complete their cleaning, their dehydration and classification of three functions.

 

Advantages and characteristics:

1, to reduce the sand erosion, improve the economic benefit at the same time reduces the pollution to the environment.

2, vibrating screen using polyurethane screen mesh, polyurethane screen mesh live longer than other types, and not easy to plug holes.

3, cyclone lining polyurethane, improve the service life of the device, can smoothly complete the slurry concentration, liquid clarification etc. 

4, fine sand fully recovery, reduce the workload of settling basin, reduces the cost of tank cleaning. 

5, Reduce the stacking time of fine material, can transfer directly to supply the market. 

6, after a lot of field test and improvement, reduced spare parts, equipment whole structure concise and efficient, recycling ability strong, easy to operation and maintenance, low operating costs. 

7, professional engineers, according to the different requirements of users, design reasonable solution. 

8, equipment with reference to the state environmental protection standards, low noise, dust can form a complete set of equipment, construction environment in full compliance with environmental requirements.

 

型号

Model

真空高压泵

Centrifugal Pump

高压分离器

Hydrocyclone

聚氨酯筛网脱水筛

Dewatering screen

处理量

Capacity

(m3/h)

重量

Weight

(Kg)

功率

Power

(Kw)

材质

Material

规格

Specification

(mm)

规格Specification

(mm)

功率

Power

(kw)

GD10-25

7.5-11

Cr26

250

1000×2000

1.5×2

30-80

2550

GD10-30

11-15

Cr26

300

1000×2000

1.5×2

40-100

2700

GD12-55

15-22

Cr26

550

1250×2500

2.2×2

100-200

3750

GD12-65

18.5-30

Cr26

650

1250×2500

2.2×2

120-250

4245

GD15-65

18.5-30

Cr26

650

1500×3000

3×2

150-275

4900

GD15-75

37-55

Cr26

750

1500×3000

3×2

180-350

5650




(此内容由www.ksjxsb.com提供)
上一条: 液压径向跳汰机 下一条: 振动筛